Subaru Forester: Arming the system
If you have accidentally triggered the alarm system
To stop the alarm
Do any of the following operations:
- Press any button on the remote transmitter.
- Turn the ignition switch to the “ON”
position. ...
To arm the system using remote transmitter
1. Close all windows and the moonroof (if
equipped).
2. Remove the key from the ignition
switch.
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
...
See also:
Accessory socket
CAUTION:
● Be sure to use a “plug-in” type accessory operating at 12 V and at 120 W or less.
When using more than one socket at the same time, make sure that the electrical
accessories ...
Type D audio set (if equipped)
Type D audio set (if equipped)
The audio set will operate only when the
ignition switch is in the “Acc” or “ON”
position.
- Power and audio controls: refer to page
- Radio operation: ...
Audio System Lighting
You can use the instrument panel
brightness control knob to adjust the
illumination of the control panel. The audio system
illuminates when the parking lights
are on, even if the radio is turn ...
