Subaru Forester: If you have accidentally triggered the alarm system
To stop the alarm
Do any of the following operations:
- Press any button on the remote transmitter.
- Turn the ignition switch to the “ON” position.
Activating and deactivating the alarm system
To change the setting of your vehicle’s alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to “Disarming the system”. 2. Sit in the driver ...See also:
Daytime Running Lights — If Equipped
The headlights will turn on as Daytime Running Lights
(DRL) and operate at lower intensity whenever the
ignition is ON, the engine is running, the headlight
switch is off, the parking brake is r ...
Moonroof (if so equipped)
- In an accident you could be thrown
from the vehicle through an open
moonroof. Always use seat belts
and child restraints.
- Do not allow anyone to stand up or
extend any portion of thei ...
Transfer Case Position Indicator Lights
The four-wheel drive indicator lights (4WD, 4 LOW) are
located in the instrument cluster. The NEUTRAL indicator
light is located on the transfer case switch. If there is
no indicator light on or ...