Toyota RAV4: Using the CD player
Loading CDs
Insert a CD.
Ejecting CDs
Press and remove the CD.
Selecting a track
Turn or press “∧” to move up or
“∨” to move down using
until the
desired track number is displayed.
Fast-forwarding and reversing tracks
To fast-forward or reverse, press
Selecting a track from a track list
1 Press .
The track list will be displayed.
2 Turn and press to select
a track.
To return to the previous display, press
(BACK).
Scanning tracks
1 Press .
The first 10 seconds of each track will be played.
2 Press again when the desired
track is reached.
Random playback
■ Current CD
Press (RDM).
To cancel, press the button once more.
Repeat play
Press (RPT).
To cancel, press the button once more.
Switching the display
Press .
Track title, Artist name and Disc title are shown on the display.
To return to the previous display, press
or
(BACK).
■Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding
for 1
second or more will display the remaining characters.
A maximum of 64 characters can be displayed.
If is pressed for 1 second or
more again, or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■Error messages
“ERROR”: This indicates a problem either in the CD or inside the player.
“CD CHECK”: The CD may be dirty, damaged or inserted up-side down.
“WAIT”: Operation has stopped due to a high temperature inside the
player. Wait for a while and then press
. If the CD
still cannot be played back, contact your Toyota dealer.
■Discs that can be used
Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not be used.
■CD player protection feature
To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used.
■If a CD is left inside the CD player or in the ejected position for extended periods
CDs may be damaged and may not play properly
■Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
NOTICE
■CDs and adapters that cannot be used
Do not use the following types of CDs or 3 in. (8 cm) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
●CDs that have a diameter that is not 4.7
in. (12 cm)
●Low-quality and deformed CDs
●CDs with a transparent or translucent recording area
●CDs that have had tape, stickers or CDR labels attached to them, or that have had the label peeled off
■CD player precautions
Failure to follow the precautions below may result in serious damage to the CDs or the player itself.
●Do not insert anything other than CDs into the CD slot.
●Do not apply oil to the CD player.
●Store CDs away from direct sunlight.
●Never try to disassemble any part of the CD player.
Switching the display
Press .
If the text continues past the end of the display, “
” is displayed. Press
.
■Reception sensitivity
●Maintaining perfect radio reception at all times is difficult due to ...
See also:
Changing a bulb
If the lighting has just
been switched
off, give the bulbs time to cool.
Handling them when hot may cause
personal injury.
Always replace bulbs with
the correct
type and specification. If y ...
Use
• Pull the cover over the cargo and hook it
into the holes in the rear cargo area pillars.
• To retract (roll up) the cover, release it from
the holes and guide it toward the rear seat
back ...
Making a phone call by saying name
1. Select the top menu (phone menu).
2. Press the talk switch .
3. Say “DIAL BY NAME”.
4. Press the talk switch again.
5. Say the desired name (voice tag) to be
called.
6. Select the “DI ...