Toyota RAV4: Using the Bluetooth® audio/phone for the first time
Before using the Bluetooth® audio/phone, it is necessary to register a Bluetooth® device in the system. Follow the procedure below to register (pair) a device:
1 Press
and select “Bluetooth”
using 
.
2 Press and select “Pairing”
using .
A passkey will be displayed.
3 SSP (Secure Simple Pairing) incompatible Bluetooth® devices: Input the passkey into the device. SSP (Secure Simple Pairing) compatible Bluetooth® devices:
Select “Yes” to register the device. Depending on the type of device, it may register automatically.
If a Bluetooth® device has both music player and cellular phone functions, both functions will be registered at the same time. When deleting the device, both functions will be deleted at the same time. If the off-hook switch is pressed and the “PHONE” mode is entered when no phones have been registered, the registration screen will be automatically displayed.
Using the Bluetooth® audio/phone
1 Bluetooth® connection condition
If “BT” is not displayed, the
Bluetooth® audio/phone
cannot be used.
2 Display
A message, name, number,
etc. is displayed.
Lower-case characters and
s ...
Menu list of the Bluetooth® audio/phone
■Bluetooth® audio/phone system functions
Depending on the Bluetooth® device, certain functions may not be available. ...
See also:
When the following messages are displayed
If one of the following messages is
displayed while operating the CD player,
determine the cause based on the following
information. If you cannot clear those
messages, please contact your SUB ...
Convenience
Activating/deactivating the EASYENTRY/ EXIT feature
You can use the Easy Entry/Exit: function to activate or deactivate the EASY
ENTRY/ EXIT feature ().
WARNING
You must make sure no one can ...
Meters and gauges
NOTE
Liquid-crystal displays are used in
some of the meters and gauges on
the combination meter. You will find
their indications hard to see if you wear
polarized glasses. ...
