Mercedes-Benz GLK-Class: Convenience
Activating/deactivating the EASYENTRY/ EXIT feature
You can use the Easy Entry/Exit: function to activate or deactivate the EASY ENTRY/ EXIT feature ().
WARNING
You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated.
To stop steering wheel movement, move steering wheel adjustment lever or press one of the memory position buttons.
Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could open the driver's door and unintentionally activate the easy-entry/exit feature, which could result in an accident and/or serious personal injury.
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Convenience submenu.
- Press the
button to confirm.
- Press the
or
button to select the Easy Entry/Exit function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting.
Switching the Fold in mirrors when locking function on/off
This function is only available in Canada.
If you switch on the Fold Mirrors in when Locking function, the exterior mirrors fold in when you lock the vehicle. If you unlock the vehicle and then open the driver's or frontpassenger door, the exterior mirrors fold out again.
If you have switched the function on and you fold the exterior mirrors in using the button on the door (), they will not fold out automatically. The exterior mirrors can then only be folded out using the button on the door.
- Press the
or
button on the steering wheel to select the Settings menu.
- Press the
or
button to select the Convenience submenu.
- Press the
button to confirm.
- Press the
or
to select the Fold Mirrors in when Locking: function. You will see the selected setting: Enabled or Disabled.
- Press the
button to save the setting.
Vehicle
Activating/deactivating the automatic door locking feature
If you select the Automatic Door Lock: function, the vehicle is centrally locked
above a speed of around 9 mph (15 km/h).
For further ...
Resetting to factory settings
For safety reasons, the Daytime Running Lights: function in the Lights submenu
is only reset when the vehicle is stationary.
Press the or
button on the steering wheel to
select the Settin ...
See also:
Installing the steel cargo grid
For information about the necessary tools and
procedures for installing/removing the steel
cargo grid, please refer to the assembly
instructions that were included when the grid
was purchased. ...
Engine coolant temperature gauge
The gauge A indicates the engine coolant
temperature.
The engine coolant temperature is within the
normal range when the gauge is within the zone
B shown in the illustration.
The engine cool ...
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the button
until you hear a
double beep indicating that the two calls have been
joined into one conference call. ...