Jeep Liberty: To Set A Desired Speed - Electronic Speed Control — If Equipped - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: To Set A Desired Speed

Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed.

NOTE: The vehicle should be traveling at a steady speed and on level ground before pressing the SET button.

    To Activate
    Push the ON/OFF button. The Cruise Indicator Light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator Light will turn o ...

    To Deactivate
    A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressi ...

    See also:

    Introduction
    The laminated panoramic roof is divided into two sections. • The rear glass section is fixed in place and cannot be moved. • The front glass section can be slid horizontally to the open or ...

    Lane Departure Warning (LDW)
    For vehicles with this feature, read the entire section before using it. WARNING The LDW system does not steer the vehicle and is an aid to help the vehicle stay in the driving lane. The LDW syste ...

    Heated oxygen sensors
    The heated oxygen sensors monitor the oxygen content of the exhaust gases. Readings are fed into a control module that continuously monitors engine functions and controls fuel injection. The r ...