Toyota RAV4: Scanning radio stations - Using the radio - Using the audio system - Interior features - Toyota RAV4 Owner's ManualToyota RAV4: Scanning radio stations

■ Scanning the preset radio stations

1 Press and holdbeep.until you hear a beep.

Preset stations will be played for 5 seconds each.

2 When the desired station is reached, press again. once again.

■ Scanning all radio stations within range

1 Press All stations with reception will be played for 5 seconds each.

All stations with reception will be played for 5 seconds each.

2 When the desired station is reached, press again. once again.

    Setting station presets
    1 Search for desired stations by turning or pressing “∧” or “∨” on . 2 Press and hold the button (from ) until you hear a beep. ...

    Switching the display
    Press . If the text continues past the end of the display, “ ” is displayed. Press . ■Reception sensitivity ●Maintaining perfect radio reception at all times is difficult due to ...

    See also:

    Installing the ball holder
    1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch assembly. 2. Slide the ball holder into the hitch assembly. 3. Align the hole in the ball ...

    Notes on regularly inspecting wheels and tires
    WARNING Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. I ...

    Normal Starting
    NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Turn the ignition switch to the START position and release when the engine ...