Volvo XC60: Low beam, Halogen - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Low beam, Halogen

1. Remove the headlight housing from the

1. Remove the headlight housing from the vehicle (see page 322).

2. Remove the cover over the bulbs (see page 323).

3. Unplug the connector from the bulb.

4. Remove the bulb by pressing the holder downward.

5. Press the new bulb into the socket until it snaps into place. It can only be secured in one position.

6. Put the cover back into position and reinstall the headlight housing.

    Removing the cover to access the bulbs
    NOTE Before starting to replace a bulb, see page 322. 1. Open the retaining clamps by pressing them to the sides. 2. Pull the cover straight out. Reinstall the cover in the reverse order. ...

    High beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Remove the bulb by turning it counterclockwise and pulling it straight ...

    See also:

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific diffe ...

    Brake fluid
    ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Ad ...

    Traction AA A B C
    The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government tes ...