Volvo XC60: Switching to another device
It is possible to switch among paired Bluetooth® devices that are in the vehicle. To do so:
1. Press MEDIA several times until Bluetooth is displayed, release the button and wait for several seconds or press OK/ MENU.
2. Be sure the external device's Bluetooth® function is turned on and that the device is "discoverable." See the devices user's guide if necessary.
3. Press OK/MENU.
4. Turn TUNE to Change Bluetooth device and confirm by pressing OK/ MENU.
> After a short time, the external device's name will appear in the display. If other devices that have been paired are in range, their names will also be displayed.
5. Select the device to be connected by turning TUNE and pressing OK/MENU to confirm.
> The external device will be connected to the infotainment system.
Audio files can now be selected using the
buttons in the center console or on
the steering wheel keypad.
Automatic connection
When the Bluetooth® function is active and the
most recently paired device is within range, it
is automatically connected. When the infotainment
system searches for the most recently
paired d ...
Removing a paired device
1. In Bluetooth mode, press OK/MENU.
2. Turn TUNE to Remove Bluetooth
device and press OK/MENU.
3. Select the device to be removed by turning
TUNE and confirm by pressing OK/
MENU.
> A que ...
See also:
CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the side of the road ...
System fault
If a fault is detected in the HDC system, an HDC
warning will be displayed in the message
centre.
If the fault is detected while the system is
operating, HDC will then fade out.
If a fault is det ...
Automatic/Emergency Locking Retractor (A/ELR)
Each passenger’s seatbelt has an Automatic/
Emergency Locking Retractor (A/
ELR). The Automatic/Emergency Locking
Retractor normally functions as an Emergency
Locking Retractor (ELR). The A/ ...