Subaru Forester: Light control and wiper control levers/switches
1) Windshield wiper
2) Mist
3) Windshield washer
4) Rear window wiper and washer switch
5) Wiper intermittent time control switch
6) Wiper control lever
7) Light control switch
8) Fog light switch
9) Headlight ON/OFF
10) Headlight flasher High/Low beam change
11) Turn signal
Instrument panel
1) Door locks
2) Outside mirror switch
3) Illumination brightness control
4) Light control lever
5) Combination meter
6) Wiper control lever
7) Hazard warning flasher switch
8) Audio ...
Combination meter
Type A
1) Tachometer
2) Trip meter and odometer
3) Select lever and gear position indicator
4) Speedometer
5) Information display switching knob
6) ECO gauge
7) Fuel gauge
8) Temper ...
See also:
Headlight beam select
Headlight beam select
1 To select the low beam, put the lever in the neutral
position as shown.
2 To select the high beam, push the lever forward
while the switch is in the position. Pull it ...
Automatic systems
Gradient Acceleration Control (GAC) and Hill
Start Assist are not active while HDC is
operating.
GAC will limit vehicle acceleration on steep
descents, allowing the driver to feel more in
control ...
Coolant temperature low indicator light (if equipped)/Coolant temperature
high warning light (if equipped)
- After turning the ignition switch
to the “ON” position, if this
indicator light/warning light behaves
under any of the following
conditions, the electrical system
may be malfun ...
