Toyota RAV4: Canceling and resuming the constant speed control
1 Pulling the lever toward you cancels the constant speed control.
The speed setting is also canceled when the brakes are applied.
2 Pushing the lever up resumes the constant speed control. Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h).
Adjusting the set speed
To change the set speed, operate the lever until the desired set
speed is obtained.
1 Increase the speed
2 Decrease the speed
Hold the lever until the desired
speed setting is obtained.
Fine a ...
Cruise control can be set when
●The shift lever is in D or 3 (4-speed models), or D or 4 (5-speed models).
●Vehicle speed is above approximately 25 mph (40 km/h).
■Accelerating after setting the vehicle speed
& ...
See also:
Wipe Parking
If the ignition is turned to LOCK/ OFF while the wipers are on LO, HI, or INT,
they will immediately stop. If the windshield wiper lever is then moved to off before
the driver door is opened or wi ...
To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Push the “SET/COAST” button once.
Now the desired speed is set and the
vehicle will keep running at that ...
Power Mirrors
To adjust the mirrors:
1. Move the selector switch to L (left) or R (right) to choose the driver or
passenger mirror.
2. Press the arrows on the control pad to move each mirror in the desired di ...
