Subaru Forester: Brake pad and lining - Breaking-in of new brake pads and linings - Replacement of brake pad and lining - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Brake pad and lining

While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake pedal lightly. Repeat this five or more times.

    Breaking-in of new brake pads and linings
    When replacing the brake pad or lining, use only genuine SUBARU parts. After replacement, the new parts must be broken in as follows. ...

    Parking brake lining
    1. Drive the vehicle at a speed of approximately 22 mph (35 km/h). 2. With the parking brake release button pushed in, pull the parking brake lever SLOWLY and GENTLY (pulling with a force of ...

    See also:

    Hood
    Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch lever and lift the hood. Hold the hood ...

    Ignition mode 0
    - Insert the remote key in the ignition slot and press it in as far as possible. ...

    Type D audio set (if equipped)
    Type D audio set (if equipped) The audio set will operate only when the ignition switch is in the “Acc” or “ON” position. - Power and audio controls: refer to page - Radio operation: ...