Volvo XC60: Adding a new contact - Phone book - Bluetooth® hands-free connection - Infotainment - Volvo XC60 Owner's ManualVolvo XC60: Adding a new contact

Enter the name of a new contact
Enter the name of a new contact

1 Switch between character entry modes (see the following table)
2 Character entry field

New contacts can be added in phone mode in Phone menu Phone book Phone book New New contact.

1. When Name is highlighted, press OK/ MENU to go to the character entry mode (see the illustration).

2. Turn TUNE to the desired letter and press OK/MENU to confirm. The number/letter keys on the center console can also be used.

3. Continue to the next letter, etc. The name entered will be displayed in the character entry field (2).

4. To switch from letter entry mode to the entry mode for numbers or special characters, or to toggle between upper and lower case letters, etc., turn TUNE to one of the selections (see the explanation in the following table) in the list (1) and press OK/ MENU.

When you have finished entering the name, select OK in the list in the display (1) and press OK/MENU. Continue by entering the phone number in the same way.

When you have entered the phone number, press OK/MENU and select a tag for the number (Mobile phone, Home, Work or General). Press OK/MENU to confirm.

When all of the contact's information has been entered, select Save contact in the menu to save.

Speed dial

    Searching for contacts
    Searching for contacts using the text wheel 1 List of characters 2 Switch between character entry modes (see the following table) 3 Phone book (list of contacts) To search for or edit a contac ...

    Speed dial
    Speed dial numbers can be added in phone mode in Phone menu Phone book Speed dial. To use speed dial to make a call in phone mode, press a button on the center console keypad followed b ...

    See also:

    Changing the wiper blades
    1. Pull the wiper blade and arm away from the glass. 2. Squeeze the locking tabs to release the blade from the arm and pull the blade away from the arm to remove it. 3. Attach the new blade to ...

    Meter needles/gauge illumination setting (models with type A combination meter)
    When the setting is activated or deactivated, the meter needles and gauge illuminate and turn off as follows. Activated: When the driver’s door is opened while the ignition switch is in the ...

    Use of lights
    Check your lights regularly for correct operation and always keep them clean. When driving during the day in conditions of poor visibility, it is helpful to drive with headlights on low beam. ...