Toyota RAV4: Wireless remote control
The wireless remote control can be used to lock and unlock the vehicle from outside the vehicle.
Vehicles without smart key system
1 Locks all doors
2 Pushing and holding: Sounds alarm
3 Unlocks all doors
Pressing the button unlocks
the driver’s door. Pressing
the button again within 3
seconds unlocks the other
doors.
Vehicles with smart key system
1 Locks all doors
2 Unlocks all doors
Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
3 Pushing and holding:
Sounds alarm
- Operation signals
- Panic mode
- Door lock buzzer
- Key battery depletion
- If the wireless remote control does not operate
- Security feature
- Conditions affecting operation
- Customization that can be configured at Toyota dealer
- Certification for wireless remote control (vehicles without smart keysystem)
Certification for the smart key system
For vehicles sold in the U.S.A. FCC ID: NI4TMLF-2 FCC ID: HYQ14AEM FCC ID: HYQ13BZS FCC ID: HYQ14ABK FCC ID: HYQ13CZA NOTE: This device complies with Part 15 of the FCC Rules. Operation is subj ...Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ...See also:
Turbo models
1. Use a screwdriver to undo the clips on
the air intake duct, then remove the air
intake duct.
1) Connector
2) Clip
2. Unplug the connector that is attached
to the top of the air cleane ...
Doing Your Own Service Work
WARNING
You can be injured and the vehicle could be damaged if you try to do service
work on a vehicle without knowing enough about it. . Be sure you have sufficient
knowledge, experience, the pr ...
Loading Discs in the In-dash Disc Changer
Your vehicle’s in-dash disc changer
holds up to six discs.
1. Press the LOAD button until you
hear a beep and see ‘‘LOAD’’ on
the display.
To load only one CD, press and
release th ...