Toyota RAV4: Customization that can be configured at Toyota dealer
Settings (e.g. wireless remote control) can be changed.
Conditions affecting operation
Vehicles without smart key system
The wireless remote control function may not operate normally in the
following
situations.
●Near a TV tower, radio station, electric power plant, airport o ...
Certification for wireless remote control (vehicles without smart keysystem)
For vehicles sold in the U.S.A.
FCC ID: HYQ12BDC
FCC ID: HYQ13BDC
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device ...
See also:
SOS Post-Crash Alert Systemв„ў
The system automatically flashes the turn signal lamps and sounds the
horn three times at four second intervals in the event of a serious impact
that deploys an airbag (front, side, side curtain [if ...
Rear combination lights
1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.
2. Slide the rear combination light assembly
rearward and remove it from ...
Arming the alarm
- Press the Lock button on the remote key.
One long flash of the turn signals will confirm
that the alarm is armed.
Alarm confirmation settings can be changed in
MY CAR, under Car settings
...
