Mitsubishi Outlander: Washer fluid - Maintenance - Mitsubishi Outlander Owner's ManualMitsubishi Outlander: Washer fluid

Open the washer fluid reservoir cap and check the level of washer fluid with

Open the washer fluid reservoir cap and check the level of washer fluid with the dipstick. If the level is low, replenish the container with washer fluid.

NOTE:
● The washer fluid container serves the windscreen, rear window and headlamps.

During cold weather

To ensure proper operation of the washers at low temperatures, use a fluid containing an anti-freezing agent.

    Engine coolant
    To check the coolant level A transparent coolant reserve tank (A) is located in the engine compartment. The coolant level in this tank should be kept between the “LOW” and “FULL” marks ...

    Brake fluid/Clutch fluid
    The brake fluid and the clutch fluid share reservoir tank. To check the fluid level The fluid level must be between the “MAX” and “MIN” marks on the reservoir. The fluid level is monitor ...

    See also:

    Tire pressure monitoring system (TPMS) (U.S.-spec. models)
    Type A Type B The tire pressure monitoring system provides the driver with the warning message indicated by sending a signal from a sensor that is installed in each wheel when tire p ...

    Back–Up Lamp
    Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...

    Important safety notes
    Consult an authorized Mercedes-Benz Center if you require information on approved and recommended tires and wheels for summer and winter operation. Advice on purchasing and caring for tires is als ...