Volvo XC60: Using the infotainment system
If the infotainment system is on when the ignition is switched off, it will come on automatically the next time the ignition is put in mode I or higher and continue using the same source (FM1, etc.) that was in use when the ignition was switched off (the driver's door must also be closed on vehicles with the optional keyless drive).
The infotainment system can be operated without a key in the ignition slot for 15 minutes at a time by pressing the On/Off button.
While the engine is being started, the infotainment system will be temporarily interrupted and will resume when the engine has started.
NOTE
To help avoid excessive battery drain,
remove the remote key from the ignition slot
if the infotainment system is used while the
engine is switched off.
Audyssey MultEQ
The Audyssey MultEQ system has been used to optimize sound quality to help ensure a world-class listening experience. ...Getting started
...See also:
Leaving the Vehicle With the Engine Running
WARNING
It can be dangerous to leave the vehicle with the engine running. The vehicle
could move suddenly if the shift lever is not fully in P (Park) with the parking
brake firmly set. And, if yo ...
Operating tips
- When the selector lever is shifted to the R
(Reverse) position, the monitor screen automatically
changes to the RearView Monitor
mode. However, the radio can be heard.
- It may take some time ...
Shift Positions
The transfer case switch is located on the center console
next to the shift lever.
Transfer Case Switch
2WD
Rear Wheel Drive High Range - This range is used for
normal street and highway driv ...