Mercedes-Benz GLK-Class: Turn signal lamps/side marker lamps
- Switch off the lights.
- Open the hood.
- Remove the headlamp cover ().
- Left-hand headlamp: detach the washer fluid reservoir ().
- Turn bulb holder 1 or 2 counterclockwise and pull it out.
- WY 5 W (turn signal lamp and side marker lamp): remove the bulb from bulb holder 1.
- PY 21 W (turn signal lamp): turn the bulb counter-clockwise, applying slight pressure, and remove it from bulb holder 2.
- WY 5 W (turn signal lamp and side marker lamp): insert the new bulb into bulb holder 1.
- PY 21 W (turn signal lamp): insert the new bulb into bulb holder 2 and turn it clockwise while applying slight pressure.
- Insert bulb holder 1 or 2 and turn it clockwise.
- Left-hand headlamp: fasten the washer fluid reservoir ().
- Install the headlamp cover ().
Parking lamp/standing lamp
Switch off the lights. Open the hood. Remove the headlamp cover (). Left-hand headlamp: detach the washer fluid reservoir (). Turn housing cover 1 counter-clockwise and pull it out. Pul ...See also:
Trailer electrical connection
Connect only approved
electrical
circuits, which are in good condition, to
the trailer socket.
The vehicle connector provides a 5 amp output
which must not be exceeded. An accessory
harness ki ...
Disc eject
For reasons of traffic safety, an ejected disc
must be removed within 12 seconds or it will
be automatically drawn back into the slot. ...
PTY (Program type) group selection
In the PTY selection mode, press the
following button to change the PTY group
by one step at a time.
Type A and B audio:
Type C audio:
This operation only changes the display. It
does not ...