Subaru Forester: To use as semi-automatic climate control system - Type B - Automatic climate control system (if equipped) - Climate control - Subaru Forester Owner's ManualSubaru Forester: To use as semi-automatic climate control system

Each function can be individually set to AUTO mode independently of the others.

Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adjusted as desired.

The temperature can be set within a range of 65 to 858F (20 to 308C).

    To use as full-automatic climate control system
    1. Place the temperature control dial in the position for the preferred temperature. 2. Set the airflow control dial and fan speed control dial in the “AUTO” position. The system’s functio ...

    Fan speed control dial
    Fan speed control dial The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the des ...

    See also:

    Changing the coolant
    Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray ...

    Brakes and clutch
    Checking brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reser ...

    Transporting the vehicle
    The towing eyes or trailer tow hitch can be used to pull the vehicle onto a trailer or transporter if you wish to transport it. Turn the SmartKey to position 2 in the ignition lock. Shift the ...