Subaru Forester: To use as full-automatic climate control system
1. Place the temperature control dial in the position for the preferred temperature.
2. Set the airflow control dial and fan speed control dial in the “AUTO” position.
The system’s functions will then switch to AUTO mode and be controlled automatically.
- Airflow control dial: AUTO position
- Fan speed control dial: AUTO position
Control panel
Control panel 1) Temperature control dial 2) Fan speed control dial 3) Airflow control dial 4) Control switch of the defogger and deicer system (Refer to “Defogger and deicer”.) 5) Ai ...To use as semi-automatic climate control system
Each function can be individually set to AUTO mode independently of the others. Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adju ...See also:
Higher speed motoring
Pre-Trip Inspections
1. Tires:
Adjust the tire inflation pressures to specification.
Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using wor ...
Using the information button
1. Press the information button .
2. All of the indicator lights will flash sequentially
for approximately 7 seconds to indicate
that the PCC is receiving information
from the vehicle. If any o ...
Touch screen care
Do not use abrasive cleaners
on the
touch screen. For approved cleaning
products, contact your Dealer/
Authorised Repairer.
The touch screen and inner bezel must be kept
clean to maintain opti ...