Mercedes-Benz GLK-Class: Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.
- Briefly pull the cruise control lever towards you ?.
- Remove your foot from the accelerator pedal.
The first time cruise control is activated, it stores the current speed or regulates the speed of the vehicle to the previously stored speed.
- Setting a speed
- Making adjustments in 1 mph (Canada: 1 km/h) increments
- Making adjustments in 5 mph (Canada: 10 km/h) increments
- Deactivating cruise control
Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h). Accelerate the vehicle to the desired speed. Briefly press the cruise control lever up 1 or down 2. Remove your ...Setting a speed
WARNING Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road con ...See also:
Towing
The rear sensors are automatically disabled
when a trailer with an approved electrical
connector is connected.
Note: Trailers fitted with LED lights will not
disable the rear parking aids sensors. ...
When the System Does Not Seem To Work Properly
The RVC system may not work properly or display a clear image if:
○ The RVC is turned off. See “Turning the Rear Vision Camera System On or Off”
earlier in this section.
○ It is da ...
Headlamp Aiming
The headlamp aiming system has been preset at the factory.
If the vehicle is damaged in an accident, the aim of the headlamps may be affected
and adjustment may be necessary.
It is recommended tha ...