Volvo XC60: Setting a time interval - Operation - Adaptive Cruise Control (ACC) - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Setting a time interval

The set time interval to vehicles ahead can be increased by pressing by and decreased by pressing is shown. The current time interval is shown briefly in the display following adjustment.

Different time intervals can be

Different time intervals can be selected and are shown in the display as 1–5 horizontal bars.

The greater the number of bars, the longer the time interval.

One bar represents a time interval of approximately 1 second; 5 bars is approximately 2.5 seconds. At low speeds, when the distance to the vehicle ahead is short, ACC increases the time interval slightly. In order to follow the vehicle ahead as smoothly as possible, ACC allows the time interval to vary considerably in certain situations.

WARNING
• Only use a time interval that is suitable in current traffic conditions.
• A short time interval gives the driver limited reaction time if an unexpected situation occurs in traffic.

The number of bars indicating the selected

The number of bars indicating the selected time interval are shown while the setting is being made and for several seconds afterward.

A smaller version of the symbol is then shown to the right in the display. The same symbol is also displayed when Distance Alert is in active mode, see page 164 .

    Changing the set speed
    After a speed has been set, it can be increased or decreased by using the or buttons. Each time one of these buttons is pressed, the vehicle's speed changes by 5 mph (approximately 8 km/h). ...

    Standby mode (temporary deactivation)
    Press to temporarily deactivate cruise control (put it in standby mode). The set speed, for example 55 mph, is then shown in parentheses. The previously set speed and time interval are resum ...

    See also:

    Compact Disc (CD) player
    - Do not force a compact disc into the CD insert slot. This could damage the CD and/ or CD player. - During cold weather or rainy days, the player may malfunction due to the humidity. If this ...

    Type A audio set (if equipped)
    Type A audio set (if equipped) The audio set will operate only when the ignition switch is in the “Acc” or “ON” position. - Power and audio controls: refer to page - Radio operation: ...

    When CD is in the player (type A)
    When the button is pressed, the player will start playback. ...