Volvo XC60: Selecting a channel category - Sirius satellite radio - Radio - Infotainment - Volvo XC60 Owner's ManualVolvo XC60: Selecting a channel category

1. Turn TUNE to display a list of channels.

2. Press EXIT.

3. Turn TUNE to scroll through the list of categories and press OK/MENU to make a selection.

> The channels in the selected category are displayed.

NOTE
• The category All is default, which enables you to scroll through the entire list of available satellite channels.
• The channel categories are automatically updated several times a year. This takes approximately two minutes and will interrupt normal broadcasting. A message will be displayed while updating is in progress. Information on channel or feature updates is available at www.sirius.com.

    SIRIUS ID
    The SIRIUS ID (sometimes referred to as the Electronic Serial Number or ESN) is required when contacting the Sirius Call Center. It is used to activate your account and when making any account ...

    Selecting a channel
    There are three ways of tuning in a channel: • Using the left and right arrow keys to go to the next channel. Skipped channels (see page 221) will be excluded. • By turning the TUNE control ...

    See also:

    Selection of manual mode
    With the vehicle either moving or stationary, move the select lever from the “D” position to the manual gate then move it to the “+” end or “−” end of the manual gate to ...

    Introduction
    The laminated panoramic roof is divided into two sections. • The rear glass section is fixed in place and cannot be moved. • The front glass section can be slid horizontally to the open or ...

    Rolling code programming
    Note: Programming the rolling code garage door opener involves time-sensitive actions. Read the entire procedure prior to beginning so you will know which actions are time-sensitive. If you do not f ...