Volvo XC60: Seat with memory function
Seat with memory function
1 Stored seat position
2 Stored seat position
3 Stored seat position
4 Memory button
Programming the memory
Three different seating and door mirror positions can be stored in the driver seat's memory.
The following example explains how button (1) can be programmed. Buttons (2) and (3) are programmed in the same way.
To program (store) a seat position and door mirror position in button (1):
1. Move the seat (and door mirrors) to the desired position using the seat and mirror adjustment controls.
2. Press and hold down the memory button (4).
3. With the memory button depressed, press button (1) briefly to store the current position for the seat/mirrors.
To move the seat and mirrors to the position that they were in when a button was programmed:
- Press and hold down button (1) until the seat and mirrors stop moving.
NOTE
As a safety precaution, the seat will stop
automatically if the button is released before
the seat has reached the preset position.
Operation
The seats can be adjusted for a short period
after unlocking the door with the remote control
without the key in the ignition slot. Seat
adjustment is normally made when the ignition
is on and ...
Remote keyless entry system and the driver's seat and door mirrors
Remote keyless entry system and the driver's seat and door mirrors
The remote control transmitter also controls
the position of the power driver's seat and door
mirrors in the following way:
1 ...
See also:
Releasing seat belts
Press release button 4() and guide belt tongue 2 back towards
belt sash guide 1.
Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or
belt tongue will be trapped ...
Economical driving conserves natural resources
Better driving economy may be obtained by
thinking ahead, avoiding rapid starts and stops
and adjusting the speed of your vehicle to
immediate traffic conditions.
Observe the following rules:
...
Horn
Horn
- Press the steering wheel hub to sound the
horn. ...