Mitsubishi Outlander: Electronic immobiliser (Anti-theft starting system)
[For vehicles equipped with the keyless operation system].
For information on operations for vehicles equipped with the keyless operation system, refer to “keyless operation system : Electronic immobiliser (Anti-theft starting system)” on page 1-16.
[Except for vehicles equipped with the keyless operation system].
The electronic immobiliser is designed to reduce significantly the possibility of vehicle theft. The purpose of the system is to immobiliser the vehicle if an invalid start is attempted. A valid start attempt can only be achieved by using a key “registered” to the immobiliser system.
NOTE:
● In the following cases, the vehicle may not be able to receive the registered
ID code from the registered key and the engine may not start. • When the key contacts
a key ring or other metallic or magnetic object. (Type A) • When the key grip contacts
metal of another key (Type B) • When the key contacts or is close to other immobilizing
keys (including keys of other vehicles). (Type C) In cases like these, remove the
object or additional key from the vehicle key. Then try again to start the engine.
If the engine does not start, contact an authorized MITSUBISHI MOTORS dealer.
● Two keys are provided. If you lose one of them, order a key from your MITSUBISHI
MOTORS Authorized Service Point as soon as possible. To obtain a replacement or
extra spare key, take your vehicle and all remaining key to your MITSUBISHI MOTORS
Authorized Service Point. All the keys have to be re-registered in the immobiliser
computer unit. The immobiliser can register up to 8 different keys.
CAUTION:
● Do not modify or add parts to the immobiliser system. Doing so could cause the
immobiliser to malfunction.
Keys
Type 1, Type 2
Two keys are provided. The keys fit all locks. Keep one in a safe place as a
spare key.
1- Key for the electronic immobiliser. 2- Key number tag.
1- Key for the electronic immo ...
Keyless entry system*
Press the remote control switch, and all doors and the tailgate will be locked
or unlocked as desired. It is also possible to operate the door mirrors, electric
window.
1- LOCK switch. 2- UNLOC ...
See also:
Disc brake pad wear warning indicators
Disc brake pad wear warning indicators
The disc brake pad wear warning indicators
on the disc brakes give a warning
noise when the brake pads are worn.
If a squeaking or scraping noise is he ...
Seat belt safety
Care should be taken to avoid
contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid. Cleaning
may safely be carried out using mild
soap and water.
The be ...
Behavior with key lock-in prevention function non-operational
- If the lock lever is turned to the rear
(“LOCK”) position with the driver’s door
open and the driver’s door is then closed
with the lock lever in that position, the
driver’s door i ...