Volvo XC60: Removing the key blade - Detachable key blade - Remote key and key blade - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Removing the key blade

Removing the key blade
Removing the key blade

1 Slide the spring loaded catch to the side.

2 Pull the key blade straight out of the remote key.

    Detachable key blade
    The key blade can be removed from the remote key. When removed, the key blade can be used to: • Lock/unlock the driver's door if the remote key is not functioning properly • Lock/unlock th ...

    Reinserting the key blade in the remote key
    1. Hold the remote key with the slot for the key blade up. 2. Carefully slide the key blade into its groove. 3. Gently press the key blade in the groove until it clicks into place. ...

    See also:

    Gradient release control (GRC)
    With HDC activated, if the vehicle is stopped on a slope using the foot brake, GRC will become active (except in Terrain Response Sand program). It operates in all gears and in neutral position. ...

    If the vehicle breaks down
    If the vehicle breaks down on the road, move it to the shoulder and use the hazard warning flashers. Refer to “Hazard warning flasher switch” on page 3-64. If the engine stops/fails Vehicle op ...

    Distance To Empty (DTE)
    Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, ...