Volvo XC60: Reinserting the key blade in the remote key - Detachable key blade - Remote key and key blade - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Reinserting the key blade in the remote key

1. Hold the remote key with the slot for the key blade up.

2. Carefully slide the key blade into its groove.

3. Gently press the key blade in the groove until it clicks into place.

    Removing the key blade
    Removing the key blade 1 Slide the spring loaded catch to the side. 2 Pull the key blade straight out of the remote key. ...

    Unlocking the doors with the detached key blade
    Insert the key blade as far as possible in the driver's door lock. Turn the key blade clockwise approximately one-quarter turn to unlock the driver's door only. NOTE After unlocking the driver ...

    See also:

    Turn Signal and Headlights
    1. Turn Signal 2. OFF 3. Parking and interior lights 4. AUTO 5. Headlights on 6. High Beams 7. Flash high beams *: If equipped Turn Signal - Push down on the lever to signal a left turn ...

    Symbols
    The RVC system may have a feature that lets the driver view symbols on the radio screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not be disabled to use the caution s ...

    Removing the ball holder
    1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch assembly. 2. Pull the ball holder out of the hitch assembly. NOTE A cover for the hitch as ...