Volvo XC60: Remote key not functioning - Other alarm-related functions - Alarm - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Remote key not functioning

If the remote key is not functioning properly, the alarm can be turned off and the vehicle can be started as follows:

1. Open the driver's door with the key blade (see page 61 for information on detaching the key blade).

> This will trigger the alarm.

2. Insert the remote key into the ignition slot

2. Insert the remote key into the ignition slot (also on vehicles with the optional keyless drive). This will turn off the alarm.

3. Start the engine.

    Audible/visual alarm signal
    • An audible alarm signal is given by a battery powered siren. The alarm cycle lasts for 30 seconds. • The visual alarm signal is given by flashing all turn signals for approximately 5 minu ...

    Reduced alarm function
    Turning off the accessory alarm sensors In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ...

    See also:

    Introduction
    Information display and controls 1 READ–press to acknowledge/confirm/erase a message) 2 Thumb wheel (used to scroll among the trip computer menus) 3 RESET–resets certain functions To scroll ...

    Seat belts
    The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belts” in the “1. ...

    SmartKey
    Display messages Possible causes/consequences and Solutions Key Does Not Belong to Vehicle You have put the wrong SmartKey in the ignition lock. Use the correct Smart ...