Subaru Forester: Operating the HomeLink® Wireless Control System
Once programmed, the HomeLink® Wireless Control System can be used to remote-control the devices to which its buttons are programmed. To activate a device, simply press the appropriate button.
The indicator light illuminates, indicating that the signal is being transmitted.
Programming for entrance gates and garage door openers in Canada
1. Unplug the motor of the entrance gate
or garage door opener from the outlet.
NOTE
If any of the HomeLink® buttons are
already programmed for other devices,
skip step 2 because it clears t ...
Programming other devices
To program other devices such as door
locks, home lighting and security systems,
contact HomeLink® at www.homelink.com
or call 1-800-355-3515. ...
See also:
Changing the set speed
After a speed has been set, it can be increased
or decreased by using the or
buttons.
Each time one of these buttons is pressed, the
vehicle's speed changes by 5 mph
(approximately 8 km/h). ...
Glove box
1 Unlock with the master key
(vehicles without smart key
system) or mechanical key
(vehicles with smart key system)
2 Lock with the master key
(vehicles without smart key
system) or mechanical ...
Lower Glove Box
Open the lower glove box by pulling
the bottom of the handle. Close it
with a firm push. Lock or unlock the
glove box with the master key.
The glove box light comes on when
the parking li ...
