Nissan Rogue: Manual operation - Automatic air conditioner - Heater and air conditioner - Center display, heater, air conditioner, audio, phone and voice recognition systems - Nissan Rogue Owner's ManualNissan Rogue: Manual operation

The manual mode can be used to control the heater and air conditioner to your desired settings.

To turn off the heater and air conditioner, turn the fan control dial to the OFF position.

Fan speed control:

Turn the fan speed control dial clockwise to increase the fan speed.

Turn the fan speed control dial counterclockwise to decrease the fan speed.

Turn the fan speed control dial to the AUTO position to change the fan speed to the automatic mode.

Air flow control:

Turn the air flow control dial to change the air flow mode.

side ventilators. : Air flows from the center and side ventilators.

side ventilators : Air flows from the center and side ventilators and foot outlets.

outlets. : Air flows mainly from the foot outlets.

foot : Air flows from the defroster and foot outlets.

Temperature control:

Turn the temperature control dial to set the desired temperature.

Air recirculation:

Push the outside air circulation recirculation/air recirculation button to change the air circulation button to change the air circulation mode.

When the indicator below the air recirculation icon is illuminated, the flowing air is icon is illuminated, the flowing air is recirculated inside the vehicle.

Outside air circulation:

Push the outside air circulation recirculation/air recirculation button to change the air circulation button to change the air circulation mode.

When the indicator below the outside air circulation the flowing icon is illuminated, the flowing air is drawing from outside the vehicle.

Automatic air intake control:

Press the outside air circulation recirculation/air recirculation button once to change operation of button once to change operation of the air conditioner in the following order.

Air recirculation mode air circulation Outside air circulation mode Air recirculation mode Automatic control mode When automatic control mode is set, the air Air recirculation mode

When automatic control mode is set, the air recirculation indicator and outside air circulation indicator will turn off.

    Automatic operation (AUTO)
    The AUTO mode may be used all year around as the system automatically controls constant temperature, air flow distribution and fan speed. To turn off the heater and air conditioner, turn the fa ...

    Servicing air conditioner
    The air conditioner system contains refrigerant under high pressure. To avoid personal injury, any air conditioner service should be done only by an experienced technician with the prope ...

    See also:

    Speaker Adaptation (SA) mode
    Speaker Adaptation allows up to two out-of dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own ...

    How to Add Coolant to the Coolant Surge Tank
    Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If you have not found a problem yet, check t ...

    Information and assistance
    It is recommended that when you sell or dispose of the vehicle, the programmed HomeLink buttons be erased for security purposes. For information on the range of available compatible products or ...