Toyota RAV4: Lock switch - Power windows - Opening and closing the windows and moon roof - Before driving - Toyota RAV4 Owner's ManualToyota RAV4: Lock switch

Press the switch down to lock

Press the switch down to lock the passenger window switches. Use this switch to prevent children from accidentally opening or closing a passenger window.

■The power windows can be operated when

Vehicles without smart key system
The engine switch is in the “ON” position.

Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.

■Operating the power windows after turning the engine off (front windows only)

Vehicles without smart key system
The power windows can be operated for approximately 45 seconds after the engine switch is turned to the “ACC” or “LOCK” position. They cannot, however, be operated once either front door is opened.

Vehicles with smart key system
The power windows can be operated for approximately 45 seconds after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned OFF. They cannot, however, be operated once either front door is opened.

■Jam protection function (driver’s window only)

If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.

■When the battery is disconnected

The power windows must be initialized in order to ensure proper operation. (Initialize each window with the respective switches.)

1 Open the window fully.
2 Fully close the window by pulling the switch up and holding it for 1 second.

    Power windows
    The power windows can be opened and closed using the following switches. 1 Closing 2 One-touch closing (driver’s window only)* 3 Opening 4 One-touch opening (driver’s window only)* *: Pr ...

    When the power window does not close normally
    If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the driver's door. ●Vehicles without sm ...

    See also:

    Starting the vehicle
    1. After starting the engine, fully depress the foot brake pedal before moving the selector lever out of the P (Park) position. This CVT is designed so that the foot brake pedal must be depress ...

    Preparing to Drive
    You still need to exercise the same care when accelerating, steering, and braking that you would in a twowheel drive vehicle. 1. Make sure all windows, mirrors, and outside lights are clean a ...

    With CD mode selected
    Press the “” button to skip forward in the track/file order. Press the “” button to skip backward in the track/file order. The track/file number will be shown on the audio display. ...