Nissan Rogue: Intelligent Key operating range - Intelligent Key system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Intelligent Key operating range

Intelligent Key operating range
Intelligent Key operating range

The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 1 .

When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating range becomes narrower, and the Intelligent Key may not function properly.

The operating range is within 31.50 in (80 cm) from each request switch 1 .

If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function.

When the Intelligent Key is within the operating range, it is possible for anyone who does not carry the Intelligent Key to push the request switch to lock/unlock the doors including the lift gate.

    Intelligent Key system (if so equipped)
    - Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before u ...

    Door locks/unlocks precaution
    - Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have di ...

    See also:

    Rolling re-start
    If the engine is switched off while the vehicle is moving, a rolling re-start can be initiated. Automatic transmission - select neutral (N) and then press the engine START/STOP button. When the en ...

    Winter tyres
    In many countries legislation exists that requires the use of winter tyres during specified periods of the year. M+S tyres have a recognised level of winter performance and need not be replaced. ...

    Calibration
    The compass may need to be calibrated if, for example, the vehicle is driven into a new magnetic zone. The character C is shown in the mirror's display if calibration is necessary. 1. Stop the ...