Subaru Forester: Installing child restraint systems with A/ELR seatbelt
- Child restraint systems and seatbelts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check the child restraint system before you place a child in it.
- Do not leave an unsecured child restraint system in your vehicle.
Unsecured child restraint systems can be thrown around inside of the vehicle in a sudden stop, turn or accident; they can strike and injure vehicle occupants as well as result in serious injuries or death to the child.
When you install a child restraint system, follow the manufacturer’s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased.
Choosing a child restraint system
Choose a child restraint system that is appropriate for the child’s age and size (weight and height) in order to provide the child with proper protection. The child restraint system should ...Installing a rearward facing child restraint
1. Place the child restraint system in the rear seating position. 2. Run the lap and shoulder belt through or around the child restraint system following the instructions provided by its ma ...See also:
Service menu
In the Service menu you can:
call up display messages ()
restart the tire pressure loss warning system (Canada only) ()
check the tire pressure electronically (USA only) ()
call up the ser ...
Power steering fluid
To check the fluid level
Check the fluid level in the reservoir while the engine is idling. Check to make
certain that the power steering fluid level is always between the “MAX” and “MIN” ...
For cold and snow weather
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
...