Mercedes-Benz GLK-Class: Important safety notes
In the following section, the term "sliding sunroof" refers to the panorama roof with power tilt/sliding panel.
WARNING
When opening or closing the sliding sunroof, make sure that there is no danger of anyone being harmed by the opening/closing procedure.
The sliding sunroof is equipped with automatic operation and the anti-entrapment feature. If the movement of the sliding sunroof is blocked during the closing procedure, the sliding sunroof will stop and open slightly.
The sliding sunroof operates differently when the sliding sunroof switch is pressed and held. See the "Problems with the sliding sunroof" section for more details.
The opening/closing procedure of the sliding sunroof can be immediately halted by releasing the sliding sunroof switch or, if the sliding sunroof switch was moved past the resistance point and released, by moving the sliding sunroof switch in any direction.
WARNING
The sliding sunroof is made out of glass. In the event of an accident, the glass may shatter. This may result in an opening in the roof. In a vehicle rollover, occupants not wearing their seat belts or not wearing them properly may be thrown out of the opening. Such an opening also presents a potential for injury for occupants wearing their seat belts properly, as entire body parts or portions of them may protrude from the passenger compartment.
Only open the sliding sunroof if it is free of snow and ice. Otherwise, malfunctions may occur.
Do not allow anything to protrude from the sliding sunroof. Otherwise, the seals could be damaged.
The weather can change abruptly. It could start to rain or snow. Make sure that the sliding sunroof is closed when you leave the vehicle. The vehicle electronics can be damaged if water enters the vehicle interior.
Resonance noises can occur in addition to the usual airflow noises when the sliding sunroof is open. They are caused by minor pressure fluctuations in the vehicle interior. Change the position of the sliding sunroof or open a side window slightly to reduce or eliminate these noises.
- Turn the SmartKey to position 1 or 2 in the ignition lock.
- Push or pull the switch in the corresponding direction.
If you press the switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by operating the switch again.
When raising the roof, automatic operation is only available if the panorama roof with power tilt/sliding panel is in the closed position.
Sliding sunroof
...See also:
Checking tire pressure electronically
Make sure that the SmartKey is in position 2 () in the ignition
lock.
Press the or
button on the steering wheel to
select the Service menu.
Press the or
button to select Tire Pres ...
Modifications
If you are considering modifying your vehicle in
any way to accommodate a disability, for
example by altering or adapting the driver's or
front passenger's seat(s) and/or airbag systems,
pleas ...
Owner maintenance
Any significant or sudden
drop in fluid
levels, or uneven tyre wear, should be
reported to a qualified technician
without delay.
In addition to the routine maintenance, a
number of simple chec ...