Subaru Forester: Ignition switch light
For easy access to the ignition switch in the dark, the ignition switch light illuminates when the driver’s door is opened or when the driver’s door is unlocked using the remote keyless entry transmitter.
The light remains illuminated for several tens of seconds and then gradually turns off under the following conditions.
- when the driver’s door is closed
- when the doors are unlocked using the
remote keyless entry transmitter
The light turns off immediately under the
following conditions.
- when the ignition switch is turned to the
“ON” position
- when all doors and the rear gate are
locked using the remote keyless entry
transmitter
Key reminder chime
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “Acc” position.
The chime stops under the following
conditions.
- when the igni ...
Hazard warning flasher
Hazard warning flasher
The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works regardless
of ...
See also:
Re-installing the wheel
1. Clean the contact surfaces on the wheel
and hub.
2. Lift the wheel and place it on the hub.
Tighten the lug nuts
3. Install the wheel nuts and tighten handtight.
Using the lug wrench, tight ...
Key lock-in prevention function
This function prevents the doors from
being locked with the key still in the
ignition switch. ...
Fuel filler cap
The fuel filler door, located on the right rear
quarter panel, is connected to your vehicle's
central locking system. ...
