Volvo XC60: How do states use OBD II for emission inspections? - Emission inspection readiness - Maintaining your car - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: How do states use OBD II for emission inspections?

Many states connect a computer directly to a vehicle's OBD II system. The inspector can then read "faults." In some states, this type of inspection has replaced the tailpipe emission test.

    What is an Onboard Diagnostic System (OBD II)?
    OBD II is part of your vehicle's computerized engine management system. It stores diagnostic information about your vehicle's emission controls. It can light the Check Engine light (MIL) if it ...

    How can my vehicle fail OBD II emission inspection?
    Your vehicle can fail OBD II emission inspection for any of the following reasons. • If your Check Engine (MIL) light is lit, your vehicle may fail inspection. • If your vehicle's Check Engi ...

    See also:

    Engine Oil Viscosity
    SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommend ...

    Engine number
    The engine number is stamped on the engine block as shown in the drawing. ...

    If the engine will not start
    WARNING: If the engine will not start, do not push or pull the car to start it. This could result in a collision or cause other damage. In addition, push or pull starting may cause the catal ...