Subaru Forester: High/low beam change (dimmer) - Light control switch - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: High/low beam change (dimmer)

High/low beam change (dimmer)
High/low beam change (dimmer)

To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “combination” on the combination meter is also on.

To switch back to low beam, pull the lever back to the detent position.

    Headlights
    Headlights To turn on the headlights, turn the knob on the end of the turn signal lever. first position Instrument panel illumination, tail lights, front side marker lights and license ...

    Headlight flasher
    Headlight flasher To flash the headlights, pull the lever toward you and then release it. The high beam will remain on for as long as you hold the lever. The headlight flasher works even ...

    See also:

    Sunroof
    (If installed) Sun Shade Your HYUNDAI is equipped with a sliding sunshade which you can manually adjust to let in light with the sunroof closed, or to block sunlight. WARNING: Never adjust ...

    Fan speed control dial
    The fan operates only when the ignition switch is turned to the “ON” position. The fan speed control dial is used to select four fan speeds. ...

    Precautions against vehicle modification
    To avoid accidental activation of the system or rendering the system inoperative, which may result in serious injury, no modifications should be made to any components or wiring of the S ...