Mitsubishi Outlander: Fog lamp switch
Front fog lamp switch*
The front fog lamps can be operated while the headlamps and tail lamps are on. Turn the knob in the “ON” direction to turn on the front fog lamps. An indicator lamp in the instrument cluster will also come on. Turn the knob in the “OFF” direction to turn off the front fog lamps. The knob will automatically return to its original position when you release it.
NOTE:
● The front fog lamps are automatically turned off when the headlamps and tail lamps
are turned off. To turn the front fog lamps on again, turn the knob in the “ON”
direction after turning on the headlamps and tail lamps.
● In case of vehicles with Daytime Running Lamp, the front fog lamps can be operated
even if the lamp switch is set to the “OFF” position.
Rear fog lamp switch
The rear fog lamp can be operated when the headlamps or front fog lamps (if so equipped) turn on. An indicator lamp in the instrument cluster comes on when the rear fog lamp is turned on. [Vehicle without front fog lamp] Turn the knob once in the “ON” direction to turn on the rear fog lamps. To turn the rear fog lamp off, turn the knob once in the “OFF” direction. The knob will automatically return to its original position when you release it. [Vehicle with front fog lamp] Turn the knob once in the “ON” direction to turn on the front fog lamps. Turn the knob once more in the “ON” direction to turn on the rear fog lamp. To turn the rear fog lamp off, turn the knob once in the “OFF” direction. Turn the knob once more in the “OFF” direction to turn off the front fog lamps. The knob will automatically return to its original position when you release it.
NOTE:
● The rear fog lamp is automatically turned off when the headlamps or front fog
lamps (if so equipped) are turned off.
● To turn the rear fog lamp on again, turn the knob once in the “ON” direction after
turning on the headlamps. (Vehicle without front fog lamps)
● To turn the rear fog lamp on again, turn the knob twice in the “ON” direction
after turning on the headlamps. (Vehicle with front fog lamps)
● In case of vehicles with Daytime Running Lamp, the rear fog lamp can be operated
even if the lamp switch is set to the “OFF” position.
Hazard warning flasher switch
Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency. The hazard warning flashers can always be operated, regardless
of the position of the ignit ...
Wiper and washer switch
Windscreen wipers
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position. If the blades are frozen to the windscreen or rear window, do not
operate t ...
See also:
Installing forward facing child restraint
1. Place the child restraint system in the
rear seating position.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
ma ...
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper blades, switch off the windshield wipers
and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press
the Start/Stop but ...