Volvo XC60: Engaging the cruise control function - Operation - Cruise control - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Engaging the cruise control function

Before a speed can be set, the cruise control system must be engaged (put in standby mode).

Press the > The symbol illuminates and the symbol (1).

> The symbol text illuminates and the text (---) mph (5) indicates that cruise control is in standby mode.

NOTE
• Putting cruise control in standby mode does not set a cruising speed.
• When cruise control is in standby mode, the driver's seat belt must be fastened before a cruising speed can be set.

    Operation
    Steering wheel-mounted controls and display 1 Standby mode 2 Resume set speed 3 Deactivating 4 Activate/set speed 5 Set speed indicator (parentheses indicate standby mode) ...

    Setting a speed
    Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...

    See also:

    Roof Rack System
    The roof rack cross rails can be locked in four positions along the roof rack side rails. Lift the lever to release and move the cross rail. Push the lever down to completely engage into the side ...

    Airbag service information
    Do not attempt to service, repair, replace, modify, or tamper with, any part of the SRS. This includes wiring or components in the vicinity of SRS components. Doing so may cause the system to ...

    Before starting or driving
    If the vehicle is involved in a collision it should be checked by a Dealer/ Authorised Repairer, or suitably qualified persons, before starting or driving. ...