Subaru Forester: DUAL mode
DUAL mode
It is possible to make separate temperature settings for the driver’s side and passenger’s side (DUAL mode).
To activate the DUAL mode:
Press the “DUAL” button. When the DUAL mode is activated, the indicator light on the “DUAL” button illuminates.
To deactivate the DUAL mode:
Press the “DUAL” button again. When the DUAL mode is deactivated, the indicator light on the “DUAL” button turns off and the temperature setting for the front passenger’s side becomes the same as the setting for the driver’s side.
Temperature control dial
Temperature control dial
To increase the temperature setting, turn
the temperature control dial clockwise. To
decrease the temperature setting, turn the
dial counterclockwise.
Each temperatu ...
Defroster button
Defroster button
To defrost or dehumidify the windshield
and front door windows, press the defroster
button “”. When the “”
button is
pressed, the indicator light on the button
il ...
See also:
Door Locks
To lock or unlock the vehicle from the outside, press
or
on the Remote Keyless Entry (RKE) transmitter.
There is a power door lock switch on the instrument panel.
There are power door lock s ...
Brake fluid
WARNING
Over a period of time, the brake fluid absorbs moisture from the air; this lowers
its boiling point.
If the boiling point of the brake fluid is too low, vapor pockets may form in
th ...
Driving with pets
Unrestrained pets can interfere with your
driving and distract your attention from
driving. In a collision or sudden stop,
unrestrained pets or cages can be thrown
around inside the vehicle an ...
