Volvo XC60: Confirmation when locking/unlocking the vehicle - Introduction - Remote key and key blade - Locks and alarm - Volvo XC60 Owner's ManualVolvo XC60: Confirmation when locking/unlocking the vehicle

Settings can be made in the menu system for audible and visual confirmation when the vehicle has been locked or unlocked. With these functions activated, the following will occur when the vehicle is locked/unlocked:

Locking confirmation

• The turn signals flash once, an audible signal sounds and the door mirrors will fold* in.

Confirmation will only be given when all doors and the tailgate are properly closed and locked.

NOTE
If you do not receive confirmation when locking the vehicle, check whether a door or the tailgate is ajar, or if this feature has been turned off in the menu.

Unlocking confirmation

• The turn signals will flash twice and the door mirrors will fold* out.

Making a setting

Different alternatives for locking/unlocking confirmation can be selected in the menus by pressing MY CAR on the center console control panel.

• To activate visual confirmation: go to Settings Light Car settings settings and select Door lock Light settings and select Door lock confirmation light and/or Unlock confirmation light by pressing OK/ MENU.

• To activate audible confirmation: go to Settings Lock Car settings settings and select Audible Lock settings and select Audible confirmation by pressing OK/MENU.

See page 133 for a description of the menu system.

    Key memory: door mirrors and driver's seat
    The position of the side door mirrors and power driver's seat are stored in the remote keys when the vehicle is locked. The next time the driver's door is unlocked with the same remote key and ...

    Immobilizer (start inhibitor)
    Each of the keys supplied with your vehicle contains a coded transponder. The code in the key is transmitted to an antenna in the ignition slot where it is compared to the code stored in the s ...

    See also:

    Voice mail
    In normal view, a speed dial number for voice mail can be programmed and accessed by pressing and holding 1. The number for voice mail can be changed in phone mode in Phone menu Call option ...

    Glass Surfaces
    All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning the ...

    Digit dial
    Once your phone is connected to the vehicle’s system, Digit Dial is the default screen in Phone mode. Using the on-screen keypad, enter the required number and touch the connect icon to send. N ...