Volvo XC60: Cleaning the BLIS camera lenses - When does BLIS function - Blind Spot Information System - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Cleaning the BLIS camera lenses

In order to function optimally, the BLIS camera lenses must be kept clean. They can be wiped clean with a soft cloth or wet sponge.

CAUTION • Clean the lenses carefully to avoid scratching.
• The lenses are electrically heated to help melt ice or snow. If necessary, gently brush away snow from the lenses.

    Limitations
    In certain situations, the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system. NOTE If the BLIS indicator lights illuminate occasion ...

    Switching BLIS on and off
    BLIS is automatically activated when the ignition is switched on. The indicator lights will provide confirmation by flashing 3 times. • The system can be switched off by pressing the BLIS b ...

    See also:

    Front-side view
    Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line 1 shows the front part of the v ...

    Introduction
    The park assist system is designed to assist you when driving into parking spaces, garages, etc. It utilizes ultrasound sensors in the front bumper and rear bumper(s) to measure the distance t ...

    System difficulties
    Use of an incorrect program will impair the vehicle's response to the terrain and can reduce the life of the suspension and drive systems. If the system becomes partially inoperable for any re ...