Subaru Forester: Charge warning light
If this light illuminates when the engine is running, it may indicate that the charging system is not working properly.
If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and check the alternator belt. If the belt is loose, broken or if the belt is in good condition but the light remains on, contact your nearest SUBARU dealer immediately.
Coolant temperature low indicator light (if equipped)/Coolant temperature
high warning light (if equipped)
- After turning the ignition switch
to the “ON” position, if this
indicator light/warning light behaves
under any of the following
conditions, the electrical system
may be malfun ...
Oil pressure warning light
If this light illuminates when the engine is
running, it may indicate that the engine oil
pressure is low and the lubricating system
is not working properly.
If the light illuminates whil ...
See also:
Checking the coolant level
Only check the coolant level when the vehicle is on a level surface and the engine
has cooled down.
Turn the SmartKey to position 2 () in the ignition lock. On
vehicles with KEYLESS-GO, press ...
Front safety belt pretensioners
The safety belt pretensioners at the front outboard seating positions are
designed to tighten the safety belts firmly against the occupant’s body
during frontal collisions, and in side collisions ...
Unlocking doors
1. Push the door handle request switch A or
the lift gate request switch B while
carrying the Intelligent Key with you.
2. The hazard indicator flashes once and outside
chime sounds once. The c ...
