Hyundai Tucson: Hazard warning system
The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition. To turn the hazard warning lights off, push the switch a second time.
Front fog light switch
(If installed) To turn on the front fog lights, push the switch. They will light when the headlight switch is in the second position and the ignition key is in the "ON" position. N ...Window defroster switch
Windshield wiper Blade De-icer (If installed) The windshield wiper blade de-icer is turned on by pushing in the switch. To turn the de-icer off, push the switch a second time. The windshield ...See also:
Unlocking doors
1. Push the UNLOCK button 2 on
the
Intelligent Key.
2. The hazard indicator flashes once. The
driver’s door will unlock.
3. Push the UNLOCK button again
within
5 seconds.
4. The hazar ...
Instrument panel overview
1. Driver’s air bag
2. Light control / Turn signals 3. Instrument cluster 4. Wiper/Washer 5. Ignition
switch 6. Steering wheel 7. Digital clock 8. Hazard 9. Audio controls (if equipped)
10. C ...
Hiding display messages
You can hide some display messages with a low priority.
Press the or
button on the steering wheel to
hide the display message. The display message is cleared.
Display messages with a hig ...