Subaru Forester: AT OIL TEMP warning light (AT models)
If this light illuminates when the engine is running, it may indicate that the automatic transmission fluid temperature is too hot.
If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off.
Automatic transmission control system warning
If the light flashes after the engine starts, it may indicate that the automatic transmission control system is not working properly.
Contact your nearest SUBARU dealer for service immediately.
Oil pressure warning light
If this light illuminates when the engine is
running, it may indicate that the engine oil
pressure is low and the lubricating system
is not working properly.
If the light illuminates whil ...
Low tire pressure warning light (U.S.-spec. models)
When the ignition switch is turned to the
“ON” position, the low tire pressure warning
light will illuminate for approximately 2
seconds to check that the tire pressure
monitoring syst ...
See also:
Wheel lug nut torque specifications
Retighten the lug nuts to the specified torque within 100 miles (160 km)
after any wheel disturbance (tire rotation, changing a flat tire, wheel
removal, etc.).
WARNING: When a wheel is installe ...
Electronic traction control (ETC)
ETC operates in conjunction with Dynamic
Stability Control (DSC) and is designed to
assist when one or more wheels have lost
traction.
If a wheel loses traction, ETC will operate the
brake on tha ...
Please bear the following in mind
Resetting the service interval display A qualified specialist workshop, e.g.
an authorized Mercedes-Benz Center, will reset the service interval display after
the necessary service work has been c ...