Volvo XC60: Zoom
The camera can be useful when attaching a trailer. Press CAM to zoom in on the trailer hitch (and press this button again to return to the normal camera view).
With the camera zoomed in on the trailer hitch, a guiding line showing the hitch's path toward the trailer will be projected. This feature can be activated in the MY CAR menu, see page 134. The guiding lines for the wheels (see the following section "Guiding lines") and for the trailer hitch cannot be displayed at the same time.
If the camera shows an enlarged (zoomed) image, turn TUNE counterclockwise, or press EXIT, CAM or OK to return to a normal view.
Activation
PAC is activated when the gear selector is
moved to R if the system is selected in the MY
CAR menu system or by pressing the CAM
button in the center console. See page 133 for
a description ...
Deactivation
Move the gear selector from R to another position.
There is a slight delay in the PAC system,
which means that the view from behind the
vehicle will remain on the screen for approximately
15 se ...
See also:
Trailer lights
Direct splicing or other improper
connection of trailer lights may
damage your vehicle’s electrical
system and cause a malfunction of
your vehicle’s lighting system.
Connection of tra ...
Stop route guidance
To stop route guidance, proceed as follows:
1. Touch Nav menu on the map menu screen.
2. Touch the Stop guidance soft key. ...
Doing Your Own Service Work
WARNING
You can be injured and the vehicle could be damaged if you try to do service
work on a vehicle without knowing enough about it. . Be sure you have sufficient
knowledge, experience, the pr ...
