Subaru Forester: Waxing and polishing - Exterior care - Appearance care - Subaru Forester Owner's ManualSubaru Forester: Waxing and polishing

Always wash and dry the vehicle before waxing and polishing.

Use a good quality polish and wax and apply them according to the manufacturer’s instructions. Wax or polish when the painted surface is cool.

Be sure to polish and wax the chrome trim, as well as the painted surfaces. Loss of wax on a painted surface leads to loss of the original luster and also quickens the deterioration of the surface. It is recommended that a coat of wax be applied at least once a month, or whenever the surface no longer repels water.

If the appearance of the paint has diminished to the point where the luster or tone cannot be restored, lightly polish the surface with a fine-grained compound.

Never polish just the affected area, but include the surrounding area as well.

Always polish in only one direction. A No. 2000 grain compound is recommended.

Never use a coarse-grained compound. Coarse-grained compounds have a smaller grain-size number and could damage the paint. After polishing with a compound, coat with wax to restore the original luster. Frequent polishing with a compound or an incorrect polishing technique will result in removing the paint layer and exposing the undercoat. When in doubt, it is always best to contact your SUBARU dealer or an auto paint specialist.

Do not use any agents with organic

Do not use any agents with organic solvents on the surface of the bulb assembly cover. However, if a polish or wax with organic solvents is applied to the cover surface, completely wipe off the polish or wax.

Otherwise, the cover surface may be damaged.

NOTE
Be careful not to block the windshield washer nozzles with wax when waxing the vehicle.

    Using a warm water washer
    - Keep a good distance of 12 in (30 cm) or more between the washer nozzle and the vehicle. - Do not wash the same area continuously. - If a stain will not come out easily, wash by hand. Some w ...

    Cleaning aluminum wheels
    - Promptly wipe the aluminum wheels clean of any kind of grime or agent. If dirt is left on too long, it may be difficult to clean off. - Do not use soap containing grit to clean the wheels. ...

    See also:

    Four Way Power Driver Seat
    A. Seat Position Handle B. Height Adjustment Control To adjust a power seat, if equipped: ○ Move the seat forward or rearward using the handle under the front of the seat cushion (A). See ...

    Carrying Cargo
    Your vehicle has several convenient storage areas: Lower glove box Upper glove box Console compartment Door pockets Seat-back pockets Seat-under tray (if equipped) Center pocket Cargo area ...

    Operation
    1 Auto open (arrow points toward the rear of the vehicle) 2 Manual open 3 Manual close 4 Auto close WARNING • During manual closing, if the laminated panoramic roof is obstructed, immediate ...