Mercedes-Benz GLK-Class: Vehicles with automatic transmission
- Apply the parking brake firmly.
- Shift the transmission to position P.
Using the SmartKey
- Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated.
The SmartKey can only be removed if the transmission is in position P.
Using KEYLESS-GO
- Press the Start/Stop button (). The engine stops and all the indicator lamps in the instrument cluster go out.
When the driver's door is closed, this corresponds to SmartKey position 1.
When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey
removed".
If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.
In an emergency, the engine can be turned off while the vehicle is in motion
by pressing and holding the Start/Stop button for three seconds.
Vehicles with manual transmission
Shift to either first gear or reverse gear R.
Turn the SmartKey to position 0 in the ignition lock and remove it. The
immobilizer is activated.
Apply the parking brake firmly.
...
Parking brake
WARNING
Engaging the parking brake while the vehicle is in motion can cause the rear
wheels to lock up. You could lose control of the vehicle and cause an accident.
In addition, the vehicle& ...
See also:
Important safety notes
The rear view camera is an optical parking aid. It shows the area behind your
vehicle in the COMAND display.
WARNING
Make sure that no persons or animals are in the maneuvering range. Otherwi ...
Using the system's menus
Selections in the RSE menus are made using
the remote control. See page 251 for more
information about the RSE menus. ...
How your vehicle differs from other vehicles
SUVs and trucks can differ from
some other vehicles in a few
noticeable ways. Your vehicle may
be:
• Higher – to allow higher load
carrying capacity and to allow it
to travel over rough te ...
