Jeep Liberty: Using Automatic Mode
Press and release the button in the center of the switch and the Sky Sliderâ„¢ will close automatically from any position.
Using Operator Mode
If the Sky Sliderâ„¢ is open from the front, press the switch
forward and hold it, the Sky Sliderâ„¢ will move forward.
Release the switch to stop the Sky Sliderâ„¢ travel at any
point.
If the S ...
See also:
Instrument panel,touch screen and audio system
Do not use upholstery cleaner
on
electrical equipment such as fascia
switches.
When cleaning around electrical
equipment such as switches, ensure
that fluids do not leak into any gaps
around ...
Loading tips
- The GVW must not exceed GVWR or
GAWR as specified on the F.M.V.S.S./
C.M.V.S.S. certification label.
- Do not load the front and rear axle to
the GAWR. Doing so will exceed the
GVWR.
- ...
Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and
adjust the seat.
2. The seat belt latch plate is located on the B-Pillar along
the outboard side and rear of the seat cushion. The rear
sea ...
