Nissan Rogue: Unlocking doors - Intelligent Key operation - Intelligent Key system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Unlocking doors

1. Push the door handle request switch A or the lift gate request switch B while carrying the Intelligent Key with you.

2. The hazard indicator flashes once and outside chime sounds once. The corresponding door or the lift gate will unlock.

3. Push the request switch again within 5 seconds.

4. The hazard indicator flashes once and outside chime sounds once again. All the doors and the lift gate will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked.

- Opening any doors.

- Pushing the ignition switch.

- Inserting the mechanical key into the ignition switch.

During this 1-minute time period, if the UNLOCK pushed, all button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.

    Locking doors
    1. Turn the ignition switch to the LOCK position.1 2. Carry the Intelligent Key with you. 3. Close all the doors.2 4. Push the door handle request switch (driver’s or front passenger’s) A or ...

    Warning signals
    The Intelligent Key system is equipped with a function that is designed to minimize improper operations and to help prevent the vehicle from being stolen. The warning buzzer sounds and the war ...

    See also:

    Tire Spinning
    When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h). WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel ...

    Introduction
    The infotainment system's voice control feature enables the driver to voice-activate certain functions in a Bluetooth®-connected cell phone or the navigation system. NOTE • The information ...

    Battery
    ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. 1 Terminals 2 Hold-down clamp ■Before rech ...